Salt-and-Pepper Polish
in Gilbert.
Medium grind that opens the cement fines and lightly exposes small aggregate. The most popular commercial finish — texture without going full aggregate. Visual depth, low maintenance, durable wear surface. Built by Danny Carpenter personally on every install. Get a free walkthrough.
Salt-and-Pepper Polish in Gilbert.
Salt-and-Pepper Polish is one of five process tiers in the polished concrete catalog. The tier defines how deep we grind into the slab and how the final surface reads. Medium grind that opens the cement fines and lightly exposes small aggregate. The most popular commercial finish — texture without going full aggregate. Visual depth, low maintenance, durable wear surface.
Where salt & pepper fits in the Mint catalog: this is the process Danny specs when the project calls for retail or restaurant. Every install runs through the four-step polished concrete protocol , diamond grinding, slab repair, lithium-silicate densification, then progressive grit polishing through Light exposure. Foot traffic is allowed within 24 hours of the final pass; vehicle traffic at 72.
Who specs salt & pepper
Retail is the most common project type for this tier in the Phoenix metro. Restaurant is the second-largest segment. Beyond those two, salt & pepper ships into a range of commercial and industrial environments across Maricopa and Pinal counties:
- Retail
- Restaurant
- Office
- Mixed-use commercial
- Light industrial
How we install it
Mechanical surface prep is the foundation of every salt & pepper job. Progressive diamond grinding opens the slab to the specified depth without scarring the surface beneath. Crack and joint repair happens between grind passes. Lithium-silicate densifier penetrates the open slab and chemically hardens it from the inside out. Final polish steps from 400 to 800 to Light exposure grit produce the spec-sheet finish. A penetrating impregnator-sealer locks it in , no topical film, no peel risk, no recoat cycle.
The numbers.
Every Mint install ships with a written spec sheet, a copy of the AZ ROC-348746 license, a certificate of insurance on request, and Danny Carpenter on site for every grind, repair, densify, and polish pass. No subcontracted crews. No walk-on labor.
Service area · Gilbert AZ
Questions, answered.
How much does salt & pepper cost in Phoenix?
Salt & Pepper polish in the Phoenix metro typically runs $5 to $12 per square foot depending on existing slab condition, grind depth required, and finish level. Larger commercial slabs and new pours land closer to the low end; restoration work on older slabs with significant repair runs higher. Request a per-square-foot quote for your specific scope.
How long does salt & pepper take to install?
A typical 5,000 square foot salt & pepper job runs 3 to 5 days from grind start to walk-on. Larger industrial slabs get zoned to keep operations live through the install. Foot traffic at 24 hours after final pass; vehicle traffic at 72 hours.
What’s the difference between salt & pepper and epoxy?
Salt & Pepper is the slab itself , diamond-ground, densified, and polished. Epoxy is a topical coating layered on top. Polished concrete lasts the life of the building and never delaminates. Epoxy can fail by hot-tire pickup, UV yellowing, or moisture blistering. For commercial spaces with long-term traffic, polished concrete is almost always the right answer.
What’s included in a Mint salt & pepper install?
Every salt & pepper project includes mechanical surface prep, Surface + light cut, slab repair where required, Light exposure, polishing or coating to the spec endpoint, and 1500. Written spec sheet on completion. AZ ROC-348746 license on file.
Does Mint take on salt & pepper jobs outside Maricopa and Pinal?
Maricopa and Pinal counties are the primary service area. Projects elsewhere in Arizona get evaluated on a case-by-case basis depending on scope, distance, and schedule. Send the project location and we’ll respond either way.
Tell us about the slab.
Free walkthrough. No commitment. Send us the address, square footage, and finish you have in mind. Danny Carpenter shows up personally to measure the slab, scope the prep, and quote the polish.
- Mon to Sat · 7 AM to 6 PM
- Maricopa + Pinal coverage
- Free walkthroughs, no obligation
- License: AZ ROC-348746